DCS Field Service Engineer

Job Description Summary

Field Service Engineer is responsible for handling all DCS/CS activities in the field for all GE Vernova Grid Automation projects, including on-shore, off-shore, in UAE and to support Oman.

The Field Service Engineer will closely coordinate the activities with DCS Engineering & Field Service team, Project management, Application and After Sales.

Job Description

Key Responsibilities

• Shall be capable of preparing Signal List from Schematics and other applicable documents.
• Shall have sufficient knowledge to prepare Interlocking documents from Main PLD.
• Responsible for the Field Services activity of the Substation Automation Systems including DCS/SCS, RTU and Cyber security.
• Take the complete ownership of technical activities for assigned projects (EHS coordination and follow up, Site Survey, Engineering, Design, Follow Up and Support Panels Integration, Pre-FAT Internal Validation, FAT with customer, Supervise Site installations, Conduct Site Testing and commissioning, Site Red mark-up and As Built Drawings, system troubleshooting and rectification.
• Perform, coordinate, and record tests for digital inputs, controls, measurements, interlocks, IEC61850 IED's and SCADA signals.
• Perform, coordinate, and record tests for SCS/CS complex functionalities and NCC/DCC with standard protocols.
• Inform and report on time to the SCS Engineer in charge.
• Prepare As-Built documentation for SCS documents (consoles, data lists, IP address plans, connectivity drawings).
• Create backups for PCs, switches, GPS equipment & other DCS equipment's installed at the site.
• Demonstrate good communication and writing skills, with experience in preparing and presenting reports to multiple persons.
• Lead the design of the Substation LAN networks, configuration of industrial computers, ethernet switches, Firewall routers and satellite clocks according to project design.
• Lead the installation of the SCS system at the site (Fiber optic layout, PC installation at panels, SCS consoles wiring, CS installation, and testing).
• Prepare and install labels for Fiber optics and Ethernet cables.
• Project planning to ensure timely achievement of project milestones as per project schedule
• Shall experience in troubleshooting of network connectivity at field
• Shall have sufficient knowledge Industrial protocols covering IEC61850, DNP3, IEC101/104, ModBUS etc.
• Manage resource planning and workload to ensure a 90% and above billable ratio for assigned projects/sites.
• Support the operations team to control projects effectively in terms of budgeted profitability, planning, and general reporting (internal/external). Ensure that agreements with customers for documentation lead times, delivery, reliability, and quality are achieved within the budgetary constraints agreed upon within the unit.
• Coordinate workplace EHS issues and ensure the availability of suitable PPE for T&C personnel, both internal and subcontracted.
• Ensure commitments to customers are met in accordance with the contract, with clear feedback through consistent customer interaction (e.g., communication via phone, email, etc.) and customer meetings, periodic reviews, etc., for assigned projects/sites.
• Knowledge of schemes and application of IEDs (e.g., BCUs, BMPs, BCUPs, protection relays, controllers, etc.) in electrical networks, including HV & EHV systems, and state-of-the-art technologies in substation automation.
• Knowledge of competitor products is advantageous.
• Shall have knowledge about HMI designing preferable GPG, AVIEW, Zenon etc
• Experience in managing sites for control systems is a distinct advantage.
• Revise drawings against comments and replying to customer / Consultant comments.
• Provide technical clarification to Suppliers/Customers.
• Coordinating with panel manufacturer.
• Representing GE Vernova before customer & consultants in technical discussions and workshop.
• Providing input and securing design documents of required quality on time from design out-sourcing partners.
• Assisting and guiding a small team of draftsmen in their daily design
• activities to bring out collaborative performance.
• Able to handle the testing, panel integration, and internal validation at GEV facility.

• Bachelor's degree in electronic/electrical engineering or related field
• Minimum of 3 years of experience in DCS (Distributed Control System), SCS (Substation Control System), Experienced in DS Agile, PACiS, GPG, G500 and D2xx RTUs solutions, etc.
• Minimum of 3 years of working experience in high voltage substation control system for engineering and field activities
• Strong knowledge in integration the protection main relays and busbar with DCS/SCS systems
• Ability to understand and implement technical drawings (wiring diagram, P&ID, General Arrangement, etc...)
• Knowledge of Sequencing & interlocking principles used in substation automation systems and their implementation on IEC61850 IED's
• Knowledge of Cyber security solutions implementation in the field of Substation Automation
• Strong communication skills in English
• This role requires 100% travel across the region

• PMP certification is an advantage but not compulsory.
• Fluency in Arabic is an advantage
• Strong knowledge in Conventional Control System (CCS) and cyber security system implementation and design activities.
• Strong knowledge in field devices, instruments and CCS systems.
• Knowledge of schemes and application of protection relays in electrical networks including HV & EHV systems, and state-of-the-art technologies in substation automation.
• Excellent written and oral communication skills, to convey technical concepts to business and technical personnel.
• Ability to read / interpret tender / contract documentation, schematics, procedures, and policy guidelines.
• Ability to draft routine reports and correspondence.
• Ability to define problems, collect relevant data, establish facts, and draw valid conclusions.
• Ability to work on multiple tasks to meet strict deadlines, work under pressure, take ownership of onsite activities.
• Experience of managing projects for protection and control systems is a distinct advantage.
• Willing to travel, in country and worldwide, and to work over-time.
• Strong analytic and problem-solving skills.
• Good interpersonal and organizational skills.