Product Functional Test Mechanical Tech - Level II - SHOP

GPP Database Link (https://cummins365.sharepoint.com/sites/CS38534/)

Job Summary:

Prepares test articles for test, including initial build and final teardown. Responsible for installing instrumentation into test articles per relevant engineering standards.

Key Responsibilities:

Assists in testing in accordance with established test procedures and methodology. Prepare test articles and associated fixtures, rigs, and equipment for testing. Demonstrates an understanding of the function of test equipment and the contribution of the test equipment to the validity of test results. Demonstrates knowledge of the functioning of the product under test to assess the contribution of the product to the validity of the test results. Performs test stand installation, troubleshooting and setups and the upkeep and maintenance of laboratory equipment. Performs other duties as required.

Qualifications

POSITION SCOPE岗位范围 :

发动机测试项目试验前准备，上下台架，执行大纲试验任务；并配合支持试验设备维护和故障处理；

Engine test project preparation, dock in and undock engine, perform test operation according to test plan; support equipment and troubleshooting;

POSITION PURPOSE岗位目标 :

-发动机试验相关的零件、设备的安装、拆卸，PUMA参数设置；

-按照测试大纲要求完成试验，准确采集数据，并能根据试验数据进行发动机故障分析；

-engine testing related components and instruments installation and disassemble, PUMA parameter configuration；

-finish test as following the test plan requirement, collect data correctly, and engine fault recognition and troubleshooting base on the data acquired；

KEY RESPONSIBILITIES岗位关键职责:

• 负责试验前准备工作，包括EGP， 排气管，后处理部件，可移动设备等
• 按要求上下台架，并保持现场整洁
• 负责台架日常点检，发现异常及时处理
• 试验前检查测试设备，确保设备处于正常状态
• 按大纲要求操作PUMA试验系统进行试验
• 负责试验过程中的部件更换, 发动机保养, 故障排除等
• 确保"实时"试验数据的有效性
• Responsible for test preparation, including EGP, AFT components, exhaust pipe, portable instruments etc.
• Dock in end undock engine, and keep test cell clean and tidy
• Responsible for daily check, fix issues if needed
• Check test equipment before test and guarantee the readiness
• Operate PUMA system to complete test task according to test plan
• Responsible for component replacement, engine service and troubleshooting
• Make sure online test data valid

Education 教育/学历:

大专

Junior college

Working experience 工作经验:

2年以上

over 2 years

Cultural/Language 语言:

基础英文应用能力

Basic English application ability

Responsibilities Competencies:

Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.

Action oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm.

Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.

Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.

Decision quality - Making good and timely decisions that keep the organization moving forward.

Drives results - Consistently achieving results, even under tough circumstances.

Data Acquisition - Prepares samples, verifies equipment calibration and performs tests according to an approved standard procedure or work instruction in a manner which ensures, and results in, data that can be trusted and delivered to the engineer or customer.

Data Reporting - Prepares documentation in a manner which clearly organizes and presents testing methods, instrument settings, the data and analysis to allow the engineer and customer to understand the results and form accurate conclusions and recommendations.

Product Function Test System Design - Interprets test equipment specifications from test standards or lab customer requirements; selects and integrates appropriate equipment, instrumentation and software to control boundary conditions and collect measurement data; assesses capability of the lab equipment against the requirements and support infrastructure.

Test Setup and Configuration - Interprets test plan to determine optimal location and orientation within a test space in accordance with local safety and environmental requirements and fabricates required system with appropriate materials.

Test Article Build - Assembles test articles according to test requirements, including all necessary installation or accommodations for instrumentation, in a manner that allows the test articles to successfully undergo product functional test.

Preventative and Predictive Maintenance - Interprets machine and tool maintenance records and data to develop and execute preventative and predictive management strategies to drive continuous improvement within the manufacturing process.

Data Quality - Identifies, understands and corrects flaws in data that supports effective information governance across operational business processes and decision making.

Problem Solving - Solves problems and may mentor others on effective problem solving by using a systematic analysis process by leveraging industry standard methodologies to create problem traceability and protect the customer; determines the assignable cause; implements robust, data-based solutions; identifies the systemic root causes and ensures actions to prevent problem reoccurrence are implemented.

Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Education, Licenses, Certifications:

High school diploma, certificate of completion of secondary education or equivalent experience in an appropriate STEM field is required.

Regionally applicable certification or two year Associates Degree from an accredited college or university in a relevant field of study may be required.

This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

Requires some work experience and intermediate level knowledge obtained through education, training or on-the-job experience.

Job Engineering

Organization Cummins Inc.

Role Category On-site

Job Type Shop

ReqID 2421271

Relocation Package Yes

Client-provided location(s): Wuhan, China

Job ID: Cummins-R-54C8A3561A4248C49D2B5C89AA176F58

Employment Type: OTHER

Posted: 2025-10-23T19:40:52